RabbitLink EG2110 Uživatelský manuál stáhnout pdf (Strana 7)

www

zworld

com

Single-Board Computers

www

zworld

com

NEMA 4 Compliant Serial Only/Non-Ethernet Ethernet & Serial Communication

RoHS

RoHS Compliant

Low-Power

Single-Board Computers

Smartcat Models BL2100, BL2110, BL2120, BL2130

Wildcat Models BL2000, BL2010, BL2020, BL2030

• IDC, friction lock, or bottom mount connectors available

The Smartcat offers optional Ethernet and keypad/displays, plus plenty

of sinking/sourcing digital I/O with A/D and D/A. Available in four flexible

configurations—two with Ethernet, two without—all Smartcat models

feature 40 digital I/O, and 3 RS-232/485 serial ports (plus a programming

port) and 512K Flash/512K SRAM. For the most demanding applications, the

BL2100 and BL2120 include 11 channels of 12-bit resolution A/D input and

4 channels of 12-bit D/A output. The Smartcat’s 16 digital push/pull outputs

allow per-point sinking or sourcing, addressing the needs of both the

domestic and international markets.

A 7-key, 122 x 32 graphic display module is available as a cost-effective user

interface (a panel-mount, water-resistant NEMA 4 version is also available).

Keypad legends are easily modified by customizing printed paper inserts.

The Smartcat is available as an unenclosed printed circuit board, mounted

on a plastic baseplate, in a plastic enclosure with a display, or with a panel-

mounted display connected via a flat cable.

• With or without 10Base-T

Ethernet w/ RJ-45

• 11 A/D and 4 D/A and

40 sourcing/sinking digital I/O

• 4 serial ports

• Optional backlit

122 x 32 graphic

display with 7

relegendable keys

and 7 LEDs

• 512K Flash/512K SRAM option

Feature BL2100 BL2110 BL2120 BL2130

Microprocessor

Rabbit 2000 at 22.1 MHz

Ethernet Port

10Base-T, RJ-45,

link and activity LEDs

None

Flash Memory

256K (standard) 256K

SRAM

128K (standard) 128K

Backup Battery

Socketed 3 V lithium coin-type, 265 mA•h, supports RTC and SRAM

Digital Inputs

24: protected to ± 36 V DC

Digital Outputs

16: source/sink 200 mA each, 36 V DC max.

Analog Inputs

11 at 1 MΩ, 12-bit,

±10 V DC, up to 4,100

samples/sec.

None

11 at 1 MΩ, 12-bit,

±10 V DC, up to 4,100

samples/sec.

None

Analog

Outputs

Four 12-bit resolution,

0–10 V DC,

update rate 12 kHz

None

Four 12-bit resolution,

0–10 V DC,

update rate 12 kHz

None

Serial Ports

4 total: two 3-wire (or one 5-wire) RS-232, 1 RS-485,

and one 5 V CMOS-compatible (programming)

Connectors

Screw terminals support max. 14 AWG/1.5 mm

(standard)

Power*

9–36 V DC, 1.5 W max. (without display), 3 W max. (with display)

Board Size

4.14’’ x 3.41’’ x 0.93’’ (105 x 87 x 24 mm)

Part Number

101-0461 101-0462 101-0463 101-0464

Tool Kit

Part Number

U.S. 101-0482 • Int’l 101-0483

* 13 V DC minimum required for full 0-10 V DC analog output range.

The Wildcat gives OEM designers optional Ethernet connectivity in a low-cost,

high-performance single-board computer. Available in four configurations—

two with Ethernet, two without—the Wildcat features up to 28 digital I/O,

onboard SPDT relay, LEDs, and optional 512K Flash and/or 512K SRAM.

For the most demanding applications, the BL2000 and BL2020 models

include 4 channels of 12-bit resolution A/D input, 5 channelsof dual-purpose

input, and 2 channels of 12-bit D/A output. For applications not requiring

high-resolution analog I/O, the BL2010 and BL2030 offer 4 channels of

10-bit resolution A/D input and 7 channels of dual-purpose input. The

dual-purpose inputs are software configurable as analog inputs or program-

mable-threshold digital inputs.

FEATURE BL2000 BL2010 BL2020 BL2030

Microprocessor

Rabbit 2000 at 22.1 MHz

Ethernet Port

10Base-T, RJ-45, link and activity LEDs None

Flash Memory

256K (standard)

SRAM

128K (standard)

Backup Battery

Socketed 3 V lithium coin-type, 255 mA·h, supports RTC and SRAM

LEDs

8: Power On, Processor Error,

4 output status, Ethernet Link,

Ethernet Activity,

6: Power On, Processor Error,

4 output status

Digital Inputs

11, protected to ±36 V DC

Digital Outputs

10 : 8 sink 200 mA, 2 sink 750 mA, 40 V DC max.

Analog Inputs

Four 12-bit Four 10-bit Four 12-bit Four 10-bit

1 MΩ, ±10 V DC, up to 4,000 samples/sec.

Analog Outputs

Two 12-bit,

0–4 V DC, update

rate 12 kHz

None

Two 12-bit,

0–4 V DC, update

rate 12 kHz

None

Dual-Purpose

Analog or

Digital Inputs

5 at 12 kΩ,

12-bit res.,

0–48 V DC

7 at 12 kΩ,

10-bit res.,

0–48 V DC

5 at 12 kΩ,

12-bit res.,

0–48 V DC

7 at 12 kΩ,

10-bit res.,

0–48 V DC

Relay Output

SPDT, 1 A @ 30 V DC, 0.3 A @ 120 V AC Uses 1 digital output

Serial Ports

4 total: two 3-wire (or one 5-wire) RS-232, 1 RS-485,

and one 5 V CMOS-compatible (programming)

Connectors

Screw terminals support max. 14 AWG/1.5 mm

(standard)

Power

9–40 V DC or 24 V AC ±10%, 1.5 W max., power jack

Board Size

3.41” x 4.14” x 0.82” (87 x 105 x 21 mm)

Enclosure Size

4.9” x 5.6” x 1.1” (124 x 142 x 28 mm)

Part Number

101-0430 101-0455 101-0456 101-0457

Tool Kit

Part Number

U.S. 101-0472 • Int’l 101-0476

• Up to 512K Flash / 512K SRAM

• 10Base-T

Ethernet with RJ-45

• IDC, friction lock, or bottom mount

connectors available

• 4 serial ports,

up to 11 A/D and 2 D/A,

up to 28 digital I/O

• Onboard relay

Coyote Models BL2500, BL2510, OEM2500, OEM2510

The BL2500 Coyote gives OEM designers an extremely low-cost embedded

control solution. Two standard models—one with Ethernet, one without—

feature the Rabbit 3000

microprocessor at 29.4 MHz, with 256K Flash and

128K SRAM (standard).

The Coyote’s compact board size is easily mountable in standard

• Rabbit 3000® processor core modules

Features BL2500 BL2510 OEM2500 OEM2510

Microprocessor

Rabbit 3000 at 29.4 MHz

Ethernet Port

10Base-T, RJ-45 (standard) None 10Base-T, RJ-45 (standard) None

Flash Memory

256K (standard)

SRAM

128K (standard)

Backup Battery

3 V lithium coin-type, 1000 mA•h, supports RTC & SRAM

Optional

LEDs

4, user-programmable

Digital Inputs

16: 15 protected to ±36 V DC, 1 protected to +5/–36V;

threshold is 1.5 V nominal.

8 protected to ±36 V DC,

threshold is 1.5 V nominal.

Digital Outputs

8, sink up to 200 mA each, 36 V DC max. standoff voltage

Analog Inputs

One 10-bit resolution, 8-bit accuracy, input range 0.1–3.1 V, 10 samples/s

Analog Outputs

Two 9-bit PWM, 0.1–3.1 V DC, 17ms settling time

Serial Ports

6 serial ports:

• 1 RS-485

• 2 RS-232 or one RS-232 (with RTS/CTS)

• 1 CMOS level asynchronous or clocked

SPI

• 1 port multiplexed to 2 RS-422 clocked SPI ports

• 1 CMOS compatible serial port (programming)

5 serial ports:

• 1 RS-485

• 2 RS-232 or one RS-232 (with RTS/CTS)

• 1

CMOS level asynchronous or clocked SPI

• 1

CMOS

compatible serial port (programming)

Expansion Ports

Yes, 2 I/O Expansion Ports Optional

Connectors

5 polarized 9-pin 0.1” pitch friction lock, two 4-pin 0.156”

pitch friction lock, two 0.156” pitch 2-pin friction lock, one

0.1” pitch 2x5 IDC, one 2 mm pitch 2x5 IDC

4 polarized 9-pin 0.1” pitch friction lock, two 0.156”

pitch 2-pin friction lock, one .1” pitch 2x5 IDC,

one 2 mm pitch 2x5 IDC (programming)

Power

8 – 40 V DC,

1 W typical w/ no load

8 – 40 V DC,

0.8 W typical w/ no load

8 – 40 V DC,

1 W typical w/ no load

8 – 40 V DC,

0.8 W typical w/ no load

Board Size

3.95” × 3.95” × 1.16”

(100 × 100 × 29 mm)

3.95” × 3.95” × 0.80”

(100 × 100 × 20 mm)

3.95” × 3.95” × 1.16”

(100 × 100 × 29 mm)

3.95” × 3.95” × 0.80”

(100 × 100 × 20 mm)

Part Number

101-0575 101-0576 101-0605 101-0606

User-Selected

Options

N/A Contact Sales Representative

Development Kit

Part Number

U.S. 101-0577 • Int’l 101-0578

100 mm DIN rail trays. External connections via polarized industry-standard

friction-lock connectors enable rapid assembly and I/O connectivity with wire

harnesses. A new line of expansion boards (including A/D, D/A, digital I/O,

and keypad/display) will interface via the two serial expansion ports.

Customized BL2500 models (OEM2500 versions) can be manufactured to

• With or without Ethernet

10Base-T or 10/100Base-T Ethernet

6 serial ports (2 RS-232, RS-485, RS-422, 2 CMOS) •

Two 9-bit PWM analog output channels •

One 8-bit A/D analog input channel •

• 1000 mAh backup battery for

RTC

(time/date clock)

and SRAM

• 4 user-configurable LEDs

• Friction-lock connectors for industry

standard wire harness connectivity

• Expansion ports for

peripheral boards

user-selected configurations in volumes

>_ 500. Customization helps OEMs realize

an extremely low cost, yet maintain a

reliable and rugged industrial solution.

Our pin-compatible RabbitCore mod-

ules provide multiple configurations

on the Coyote, including Ethernet, or

non-Ethernet versions, and memory

upgrades. The optional Ethernet inter-

face (10 Mbps or 10/100 Mbps) allows

easy connection to local networks or

the Internet. Powerful software allows

TCP/IP communication including send-

ing e-mail and serving web pages.

Six serial ports support external com-

munications. Two ports are connected

to standard full-duplex RS-232 circuitry.

One port allows connection to industry

standard multi-drop RS-485 networks.

One port, designed to allow serial

expansion, is multiplexed through two

very high-speed (>1Mbit/ps capability)

SPI ports with each line going through

RS-422 differential pair signaling. The

SPI ports connect to RJ-45 connectors

(accepting standard category 5 cabling)

for ease of connectivity. One serial port

is a 3.3 V CMOS-level port that can either

be asynchronous or clocked. The last

port is for programming.

RabbitNet Compliant

Order Online

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Komentáře k této Příručce

Žádné komentáře

RabbitLink EG2110 Uživatelský manuál Strana 7

Komentáře k této Příručce

Související produkty a manuály pro Sítě RabbitLink EG2110